Changing The Display Setting; Fixing The Display Orientation; Switching The Input Source - Sony LMD-DM20C Instructions For Use Manual

Changing the Display
Setting
From the on-screen menu, you can change the three
settings below.
For detailed instructions on each setting, see the
following pages.
SWITCHING EDID
"Fixing the Display Orientation" (page 19)
SWITCHING INPUT SOURCE
"Switching the Input Source" (page 19)
SWITCHING CONFIGURATION
"Switching Configuration Data" (page 20)

Fixing the Display Orientation

The unit can be used in either portrait or landscape
orientation by rotating the panel.
If you use the unit with the display orientation set
regardless of the LCD panel orientation, switch the
EDID setting on the SWITCHING DATA screen. The
default setting is "Auto Selection."
Follow the instructions below to switch the EDID
setting.
Switching EDID settings
1
Press either the + or – button on the rear panel once.
The information screen appears.
2
Press and hold the + and – buttons simultaneously
for more than 2 seconds.
The SWITCHING EDID screen appears.
3
Press either the + or – button to move the B
(cursor), and select an EDID setting.
4
Press the + and – button simultaneously for more
than 2 seconds.
The information screen appears.
Example when "Landscape" is fixed:
The EDID status switches to "Landscape."
The EDID setting switches to "Fixed."
Notes
• The configuration cannot be switched simply by
moving the B (cursor). In order to apply the
change, press and hold the + and – buttons
simultaneously for more than 2 seconds after
moving the cursor.
• The setting change will be canceled if there is no
menu operation for more than 15 seconds.
5
Press either the + or – button to close the
information screen and exit the setting.

Switching the Input Source

Follow the instructions below to switch the input source.
19

Changing the Display Setting