Ethernet-based remote control
The BVM-E and BVM-F Series monitors and the BKM-16R
Monitor Control Unit are equipped with an Ethernet port,
allowing remote control of display parameters across a
standard Ethernet connection. One BKM-16R Monitor Control
Unit can control up to thirty-two (32) BVM* monitors.
* Includes BVM-A CRT monitors, BVM-L , PVM-L, and BVM-E/-F Series monitors.
Easy Setup and Adjustment
Auto White Adjustment
The BVM-E and BVM-F Series monitors employ a software-
based color temperature (white balance) calibration
function, which is called "Monitor_AutoWhiteAdjustment".
Combined with a PC and commercially available calibration
tools*, this function enables simple adjustment of the
monitor's white balance.
* Konica Minolta CA-210, CA-310, CS-200, DK-Technologies PM5639/06, X-Rite
i1 Pro/i1 Pro2, Photo Research PR-655/670, Klein K-10, and JETI specbos
1211. A connector is required for each color analyzer.
"Monitor_AutoWhiteAdjuestment" GUI image
Built-in Color Sensor for Auto White Adjustment
The BVM-E170A and BVM-F170A are equipped with a built-in
color sensor, which allows the user to calibrate the monitor's
color temperature (white balance) as needed without an
external probe. Calibration performance is minimally affected
by ambient light.
This function ensures color and gamma consistency, and
reduces user maintenance tasks.
"Character Off" button
To facilitate parameter adjustments, the On-Screen Menu
indication can be taken off the screen, while in Menu mode.
The On-Screen Menu indication can be toggled on or off with
a simple press of a button on the BKM-16R's front panel.
Auto Chroma / Phase adjustment*
An Auto Chroma / Phase / Matrix setup function is provided
on BVM-E and BVM-F Series monitors, which automatically
adjusts the monitor's chroma, phase, and matrix using
external color bars.
* Supports analog signal inputs only.
The BVM-E170A and BVM-F170A can be DC operated. Due
to their lightweight and small-size design, with a comparable
height to the former 14-inch BVM-CRT monitors, the BVM-E170A
and BVM-F170A are ideal for field and OB van applications.
Tilt stand for BVM-E250A / F250A
BVM-E250A with the optional BKM-37H* tilt stand
* Requires the latest version of the BKM-37H with a product code suffix /1 or
VESA™ Mounting (200 x 100 mm pitch)*
EIA 19-inch Standard Rack-mountable*
H Delay / V Delay
NTSC Setup Level (0%, 7.5%)
Component Level (SMPTE / EBU-N10 or Betacam)
Serial Remote (Ethernet)
Parallel Remote (D-sub 9-pin)
Tally Lamp (Amber)
EXT Sync (for RGB / YUV)
*1 BVM-E250A / BVM-F250A only.
*2 BVM-E170A / BVM-F170A only. Mounting brackets are supplied.
BVM-E170A rear view