Managing Devices - Brocade Communications Systems 300 Administrator's Manual

3

Managing devices

Managing devices

The Devices page displays the following information:
1. Click View under Devices in the task panel to display a table of information for all of the
36
•
Reboot or power cycle the switch
When the switch is rebooted, the newly licensed ports come up as enabled.
•
Use the Advanced Management tool
See "Accessing Web Tools for advanced management"
launching Web Tools.
•
Use the command line interface
See the Fabric OS Administrator's Guide for information on using the command line
interface.
•
Whether the device is an HBA, an HBA plus storage, or a storage only device.
•
Device alias name, if one exists.
•
Vendor name.
•
Device name.
•
WWN of the device port.
•
Switch and port to which the device is connected.
connected devices (Figure
The entries in the table are based on the device WWNs, so a single physical device can have
more than one entry in the table. The device information can be viewed, copied, or exported.
FIGURE 33
Devices view
33).
on page 45 for information on
EZSwitchSetup Administrator's Guide
53-1002157-01