Starting And Stopping; Making A Flat Cut - Skil 3540 Operating/Safety Instructions Manual

Starting and Stopping

To reduce the risk of electrocution, keep
all connections dry and off the ground. Do
not touch plug with wet hands.
To reduce the risk of electric shock, plug
tile saw into Ground fault circuit
interrupter (Gfci) protected outlet only. if a Gfci
protected outlet is not available, use a portable receptacle
with built-in Gfci protection
To reduce the risk of electric shock,
always test Gfci to make sure it is
functioning properly before plugging tile saw into Gfci
protected receptacle.
To start the saw:
To stop the saw:

making a flat cut

Never place your hand or fingers in the
path of the tile blade.
operation
oN
off
13.
fence
Scale Rule
locking Knob