Using hotkeys
Hotkeys are combinations of the
The icons on the
functions and procedures are discussed in the following sections.
Function
Display system information.
Initiate Standby.
Switch the screen image.
Enable/disable the TouchPad.
Display battery information.
Decrease screen brightness.
Increase screen brightness.
Activate the ambient light sensor.
To use a hotkey command on the computer keyboard, follow either of these steps:
●
Briefly press the
– or –
●
Press and hold down the
release both keys at the same time.
Displaying system information
Press
fn+esc
version number.
fn
key (1) and either the
f3
through f5, and
f8
fn
key, and then briefly press the second key of the hotkey command.
fn
key, briefly press the second key of the hotkey command, and then
to display information about system hardware components and the system BIOS
esc
through
f11
keys represent the hotkey functions. Hotkey
Hotkey
fn+esc
fn+f3
fn+f4
fn+f5
fn+f8
fn+f9
fn+f10
fn+f11
key (2) or one of the function keys (3).
Using the keyboard
53