HP ProLiant DL320 Quickspecs page 42

QuickSpecs
Technical Specifications
Integrated Serial ATA
Controller
Embedded NC326i Dual
Port Gigabit Server
Adapter
Simultaneous drive
transfer channels
Transfer rate
synchronous (maximum
theoretical)
Data transfer method
Drive support
Data transfer modes
Protocol
Feature
RAID levels supported 0, 1, 1+0
RAID Features
RAID OS Support
Network Interface
Compatibility
Data Transfer Method Four lane (x4), 100MHz PCI Express Reference Clock
Controller
Network Transfer Rate 10Base-T (Half-Duplex)
Connector
Cable Support
DA - 13344 Worldwide QuickSpecs — Version 19 — 4.22.2010
4 channels
150 MB/s per channel
HP Smart Array B110i SATA RAID Controller (non-RAID mode)
HP Smart Array B110i SATA RAID Controller (RAID Mode)
Serial ATA
Legacy Mode
Combined Mode
Serial ATA
NCQ (Native Command Queuing); AHCI (Advanced Host Controller
Interface)
Supports multiple logical volumes
Setup through ROM based Array Configuration Utility
Installation scripting support
NOTE: This controller does not support Hot Plug functions or LED
functions.
Microsoft Windows Server 2003/2008
NOTE: In order to implement integrated SATA RAID with Smart Start
8.20 on Windows 2003/2008, the use of a floppy drive is necessary.
Linux (Red Hat, SuSE, UnitedLinux)
10Base-T/
100Base-TX/
1000Base-TX
IEEE 802.3 10Base-T
IEEE 802.3ab
1000Base-T
IEEE 802.3u 100Base-
TX
BCM5715
10Base-T (Full-Duplex)
100Base-TX (Half-
Duplex)
100Base-TX (Full-
Duplex)
1000Base-TX (Half and
Full-Duplex)
RJ-45
10Base-T
10/100/1000Base-TX
HP ProLiant DL320 Generation 6
10 Mb/s
20 Mb/s
100 Mb/s
200 Mb/s
2000 Mb/s
Categories 3, 4 or 5 UTP; up to 328 ft (100 m)
Category 5 UTP; up to 328 ft (100 m)
Page 42