Sharp XE-A203 - Cash Register Thermal Printing Graphic Logo Creation Service Manual page 5

Segment
Display
position
Amount 1-8
Minus sign 2-10
Error 8-10
PGM Mode 10
CASH, CHECK, 10
CHARGE
SUB TOTAL/ 10
short tender
Change 10
Currency 10
Conversion
Department 9-10
PLU 7-10
Repeat 8
Receipt OFF 9
DC
SHIFT
NUMBER
Clerk No. 2, 3
EJ FULL 8-10
Low Battery 10
No Battery 10
Decimal Point
Display
position
Decimal point 7-1
TAB 4-1
EJ near full 8, 9
Description
-: Floating
Exx: xx = error code
P
F: Light up when a registration is
finalized by depressing [CASH],
[CHECK], [CHARGE] key
o
C: Light up whenever the change due
amount appears in the display.
c: Light up whenever the foreign
amount appears in the display.
No zero-suppressed
No zero-suppressed
Endless count, starting from 2.
_
_: Double size character entry status
_: Shift character entry status
_: Number character entry status
-xx-: clerk number
E-E: Light up when EJ memory is
FULL at the timing of key entry
(by PGM selection).
L:
:
L
Description
(by PGM selection)
XE-A203U/XE-A203A SPECIFICATIONS
6. PRINTER
1) Printer
• Part number : M-T53II
• NO. of station : 1 (Receipt or journal)
• Validation : No.
• Printing system : Line thermal
• No. of dot : 288 dots
• Dot pitch : Horizontal
Vertical
• Font : 10 dots (W) x 24 dots (H)
• Printing capacity : max. 24 characters
• Character size : 1.67mm (W) x 4.17mm (H) at 10 x 24 dots
• Print pitch : Column distance 2.0mm
Row distance
• Max. Print speed : Approximate 60mm/s (Approximate 12 l/s)
• Max. Paper feed speed: Approximate 60mm/s (Approximate 12 l/s)
(Manual feed) : Approximate 40mm/s (Approximate 12 l/s)
• Reliability : Mechanism LIFE 6 million lines used to
high-quality thermal paper
• Paper end sensor : Set up
• Cutter : No
• Near end sensor : No
2) Paper
• Paper roll dimen- 57.5
sion:
Max. 80mm
• Paper quality: High-quality thermal paper
paper thickness:
3) Logo stamp
• No
4) Printing area
Number of thermal head heater elements 288 dots
(4.75)
(max.24 characters)
0.167
(Paper dimension)
– 3 –
0.167mm
0.174mm
5.21mm
m
0.5mm in width
in diameter
0.06 to 0.08mm
Nihon seisi thermal paper : TF50KS-E
Oil thermal paper: PD150R,
PD160R
48 (288 dots) (4.75)
print area
57.5±0.5
(units : mm)