Native Command Queuing; Table 38 Preserved Software Setting - Hitachi Travelstar 2.5 inch SATA HTS722020K9A300 Oem Specification

Setting
Initialize device parameters
Power Management Feature Set Standby
Timer
Security mode state
Set max address
Set feature
Set multiple mode

Table 38 Preserved Software Setting

12.16

Native Command Queuing

Native Command Queuing feature (Read / Write FPDMA Queued commands) is supported. Please
refer to the Serial ATA II Specification about Native Command Queuing.
The host shall not issue a legacy ATA command while a native queued command is outstanding.
Upon receiving a legacy ATA command while a native queued command is outstanding, the device
aborts the command and halts command processing of outstanding native queued commands.
7K200 SATA OEM Specification
Track length
Number of head
Number of cylinder
Capacity
Time to fall into standby mode
Security freeze lock
Security unlock
Capacity
Write Cache Enable/Disable
Set Transfer Mode
Advanced Power Management
Enable/Disable
Read Look-Ahead
Reverting to Defaults
Block size
69/173
Contents