Hitachi Travelstar 2.5 inch SATA HTS722020K9A300 Oem Specification page 136

B
LBA Low
LBA High/Mid
H
L
Input Parameters From The Device
LBA Low
LBA High/Mid
H
7K200 SATA OEM Specification
02h SET MAX LOCK
03h SET MAX UNLOCK
SET MAX FREEZE LOCK
04h
When the Set Max ADDRESS command is executed, this register is
ignored.
Option bit for selection whether nonvolatile or volatile. B=0 is volatile
condition. When B=1, MAX LBA/CYL which is set by Set Max
ADDRESS command is preserved by POR. When B=0, MAX LBA/CYL
which is set by Set Max ADDRESS command will be lost by POR.
in LBA mode, this register contains LBA bits 0 - 7 which is to be
input.(L=1)
In CHS mode, this register is ignored. (L=0)
In LBA mode, this register contains LBA bits 8 - 15 (Mid), 16 - 23 (High)
which is to be set. (L=1)
In CHS mode, this register contains max cylinder number which is to be
set. (L=0)
In LBA mode, this register contains LBA bits 24 - 27 which is to be
input.(L=1)
In CHS mode, this register is ignored. (L=0)
LBA mode.Indicates the addressing mode.L=0 specifies CHS mode and
L=1 does LBA addressing mode.
In LBA mode, this register contains Adjusted max LBA bits 0 - 7.(L=1)
In CHS mode, this register contains max LBA Low(= 63). (L=0)
In LBA mode, this register contains Adjusted max LBA bits 8 - 15 (Mid),
16 - 23 (High). (L=1)
In CHS mode, this register contains max cylinder number which is set.
(L=0)
In LBA mode, this register contains Adjusted max LBA bits 24 - 27. (L=1)
In CHS mode, this register contains max head number(= 15).(L=0)
136/173