Sleep (E6H/99H); Table 108 Sleep Command (E6H/99H) - Hitachi Travelstar 2.5 inch SATA HTS722020K9A300 Oem Specification

14.38

Sleep (E6h/99h)

Command Block Output Registers
Register
Data
Feature
Sector Count
LBA Low
LBA Mid
LBA High
Device
Command
Error Register
7 6 5 4
CRC UNC 0 IDN
0 0 0 0

Table 108 Sleep Command (E6h/99h)

This command is the only way to cause the device to enter Sleep Mode.
When this command is issued, the device confirms the completion of the cached write commands.
Then the device is spun down, and the interface becomes inactive. The only way to recover from
Sleep Mode is with a software reset or a COMRESET.
If the device is already spun down, the spin down sequence is not executed.
7K200 SATA OEM Specification
7 6 5 4 3 2 1 0
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
1 1 1 0 0 1 1 0
3 2 1 0
0 ABT T0N AM
N
0 V 0 0
140/173
Command Block Input Registers
Register
Data
Error
Sector Count
LBA Low
LBA Mid
LBA High
Device
Status
Status Register
7 6 5 4
BSY RDY DF DSC DRQ COR IDX ERR
0 V 0 V
7 6 5 4 3 2 1 0
- - - - - - - -
...See Below...
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
...See Below...
3 2 1 0
- 0 0 V