Furuno FELCOM 81A Installation Manual page 35

Inmarsat b mobile earth station
Table of Contents

Advertisement

2.3 Telephone
General
Mounting location
Mounting
Mounting Base
Table top: Use installation
materials.
Bulkhead: Use telephone
accessories.
Secure
mounting
base with
tapping
screws.
Bottom View
Mounting Base Stopper
To remove the telephone from mounting
base, press the mounting base stopper,
and slide telephone forward.
Handset Supporter
Catch
The telephone can be installed on a tabletop or a bulkhead.
Select a location where the unit can easily be operated.
For installation on a wooden table, use the mounting
base and tapping screws (supplied).
For installation on a steel table, fix the telephone with
nuts and bolts.
For bulkhead mounting, use the bulkhead mounting
base (supplied with telephone accessories).
Select a location where temperature and humidity are
moderate and stable. Secure sufficient space around the
unit for ease of operation and maintenance.
The mounting dimensions are given in the outline drawing
at the end of this manual. Determine the mounting loca-
tion, leaving sufficient space around the unit, and then fix
the mounting base to the mounting location. The mounting
base is different for bulkhead and tabletop mounting,
however the mounting procedure is the same for all.
1. Fix the mounting base to the mounting location with
four tapping screws (4 × 16).
2. On the underside of the telephone, unfasten the screw
Attach
shown in the figure at left. (The screw may be discar-
handset
supporter
ded.) Attach double-sided tape (supplied) to the handset
here.
supporter. Fasten the handset supporter to the underside
of the telephone with a screw (supplied : 3 × 14).
Unfasten
this
screw.
3. The catch in the receiver cradle functions to hang up the
handset completely. Set the catch in the upward position
as shown below. (To detach the handset from the
hanger, slide the handset upward.)
4. Set the telephone to the four catches in the mounting
base and then slide it toward you until you hear a click.
5. Attach the "SLIDE" label (supplied) to the handset.
6. Attach English language label (supplied) to the tele-
phone.
2.3 Telephone
2-11

Advertisement

Table of Contents
loading

Table of Contents

Save PDF