IP Static Routing with CHAP Authentication and MLP
IP Static Routing with CHAP Authentication and MLP
This section describes how to configure the central site Cisco 4500 series router and the
remote Cisco 765 series router for IP static routing with Challenge Handshake
Authentication Protocol (CHAP) and Multilink Protocol (MLP).
Figure 4-2 is an illustration of the configuration used in this example.
Figure 4-2
IP Static Routing with CHAP Authentication and MLP
Serial interface
IP address: 172.16.125.7
IP subnet mask: 255.255.255.0
Ethernet interface
IP address: 192.168.147.9
IP subnet mask: 255.255.255.248
Telecommuter PC
Remote router
IP address:
ISDN number: 5553693
192.168.147.8
User profile name: 4500
4-4
Cisco700 Series Router Configuration Guide
Serial interface
IP address: 172.16.125.1
IP subnet mask: 255.255.255.0
765
Ethernet interface
IP address: 172.18.124.2
IP subnet mask: 255.255.255.0
ISDN
CPA4500
Central site router
ISDN number: 5558011
Host name: 4500
Central site network
IP network: 172.18.124.0