HP ProCurve 2520G-PoE Series Installation And Getting Started Manual page 10

Introducing the Switch
1-2
Dual-personality ports use either the 10/100/1000Base-T RJ-45 connector, or a
supported ProCurve mini-GBIC (Small Form Factor Pluggable (SFP)) for
fiber-optic connection. By default, the RJ-45 connectors are enabled.
These switches can be directly connected to computers, printers, and servers
to provide dedicated bandwidth to those devices, and you can build a switched
network infrastructure by connecting the switch to hubs, other switches, or
routers. In addition, the 2520G-PoE switches offer full network management
capabilities.
Using ProCurve mini-GBICs, these products support optional network
connectivity with the following speeds and technologies:
Table 1-1. Optional Network Connectivity, Speeds and Technologies
Speed Technology
100-FX
100 Mbps
100-BX
1000-SX
1000-LX
1 Gbps
1000-LH
1000-BX
1
For supported transceivers, see
GBICs and SFPs have links to a list of supported products (first question in the "General
product information" category).
For technical details of cabling and technologies see
tion Specifications"
in the appendix A.
1
Cabling
Fiber (multimode)
Fiber (single mode)
Fiber (multimode)
Fiber (multimode or single mode)
Fiber (single mode)
Fiber (single mode)
www.hp.com/go/procurve/faqs
"Cabling and Technology Informa-
Transceiver Form-
Factor and
Connector
SFP ("mini-GBIC")
Connector
LC
LC
LC
LC
LC
LC
. HP ProCurve Mini-