Locking & Unlocking The Doors; Remote Starting; Remote Trunk Release; Valet Override Mode - Omega RS-7K Operating & Installation Instructions Manual

LOCKING & UNLOCKING THE DOORS
To Lock The Vehicle's Doors: Press & Release Transmitter Button
- The parking-lights will flash once to confirm and the doors will lock.
To Unlock The Vehicle's Doors: Press & Release Transmitter Button
- The parking-lights will flash twice to confirm and the doors will unlock.
REMOTE TRUNK RELEASE & CARFINDER
To Activate The Trunk Release:
To Activate Carfinder:
Press & Hold Transmitter Button
#
1
THE PARKING-
LIGHTS WILL FLASH
ONCE
THE DOORS WILL LOCK
THE PARKING-
LIGHTS WILL FLASH
TWICE
THE DOORS WILL UNLOCK
5
Press & Release Transmitter Button
OPERATE OPTIONAL
TRUNK RELEASE
# 1 For 3 Seconds
THE PARKING-LIGHTS
WILL FLASH TWICE
7
To Remote Start The Vehicle: Press & Release Transmitter Button
1) The parking-lights will flash once then turn On to confirm Start process.
2) The ignition circuit will turn On.
3) Within 2 seconds the parking lights will turn Off and the starter will engage.
4) The engine will start to run and the starter will be disengaged.
5) The parking lights will stay On while the RS unit is controlling the engine.
6) If the engine stalls, the RS unit will make two attempts to restart it.
7) After 15/30 minutes
- Upon entering the vehicle place the ignition key in the switch and turn it
#
2
to the "On" position. Do not turn the key to the "Start" position.
Safety Features
- The RS unit will only engage if the gear shift selector is in "Park".
- The unit will not engage if the hood is opened.
Deactivation
- To stop the engine by remote control, simply press transmitter button
- Stepping on the brake pedal prior to inserting the key will deactivate the RS unit.
- Opening the hood will deactivate the RS unit.
Valet Override: The position of the Override switch allows or prevents the RS unit
# 4
from being activated. This feature is used when you do not wish the unit to be
operated, such as when you leave it with a valet parking attendant, mechanic or if
you loan your car to another person.
To engage the Valet Override mode, simply turn the Override Switch OFF. It is
recommended to always turn the Override Switch OFF to prevent unintentional or
unauthorized use of the Remote Car Starter.
Note: Do not confuse the toggle type Valet Override switch with the push button
programming button.

REMOTE STARTING

the RS unit will turn the engine off.
(programmable)
6

VALET OVERRIDE MODE

8
# 3
#
3 again.