Download Print this page

Omega RS-3 Operating & Installation Instructions Manual

Deluxe modular remote car starter for automatic transmission vehicles only

Advertisement

Quick Links

OPERATING & INSTALLATION
INSTRUCTIONS
DELUXE MODULAR REMOTE CAR STARTER
FOR AUTOMATIC TRANSMISSION VEHICLES ONLY
COPYRIGHT: OMEGA RESEARCH & DEVELOPMENT 1999
INTRODUCTION & WARNINGS
Congratulations on your purchase of the RS-3 Remote Car Starter. The RS-3
will allow you to start your vehicle's engine from the comfort of your home or
office, allowing your vehicle to warm up in winter and cool down in summer. When
you leave your vehicle, simply set the climate controls for what you desire to be
operating upon remote start - heater, defroster or air conditioning.
The RS-3 is an "Add-On" unit designed to be used in conjunction with another
remote control unit such as a remote vehicle security or keyless entry system.
We highly recommend that this system be professionally installed, as the com-
plexity of the modern automobile and the nature of circuits to be accessed is often
beyond the abilities of most do-it-yourselfers.
There are several safety considerations with using and installing the RS-3 Re-
mote Car Starter. Among them are:
- This unit is for Automatic Transmission vehicles only. Installation in a manual
transmission equipped vehicle can result in property damage or personal in-
jury.
- This unit is for fuel injected gasoline engines only.
- Children should not be left unattended in, or be allowed to play with the activat
ing transmitters of a remote starter equipped vehicle.
- Do not use this unit in an enclosed structure or garage.
RS-3
1
4
Operating Instructions:
Introduction & Warnings ......................................................................... 4
Remote Starting .................................................................................... 5
Valet Override Mode ............................................................................... 6
Installation Instructions:
Warnings ........................................................................................... 7-8
5-Wire Connector .............................................................................. 9-11
3-Wire Blue Connector ..................................................................... 12-13
7-Wire Connector ............................................................................ 14-24
Engine Detect
(Smart, Tach, Vacuum)
Features Programing ............................................................................ 25
Wiring Diagram .................................................................................... 26
REMOTE STARTING
To Remote Start The Vehicle: Press the necessary button combination on
the host system's transmitter.
1) The parking-lights will flash once then turn On to confirm Start process.
2) The ignition circuit will turn On.
3) Within 2 seconds the parking lights will turn Off and the starter will engage.
4) The engine will start to run and the starter will be disengaged.
5) The parking lights will stay On while the RS unit is controlling the engine.
6) If the engine stalls, the RS unit will make two attempts to restart it.
7) After 15/30 minutes
(programmable)
- Upon entering the vehicle place the ignition key in the switch and turn it to
the "On" position. Do not turn the key to the "Start" position.
Safety Features
- The RS unit will only engage if the gear shift selector is in "Park".
- The unit will not engage if the hood is opened.
Deactivation
- To stop the engine by remote control, simply press transmitter button
- Stepping on the brake pedal prior to inserting the key will deactivate the RS unit.
- Opening the hood will deactivate the RS unit.
INDEX:
................................................. 21-23
3
the RS unit will turn the engine off.
5
#
3 again.

Advertisement

loading

Summary of Contents for Omega RS-3

  • Page 1 4) The engine will start to run and the starter will be disengaged. The RS-3 is an "Add-On" unit designed to be used in conjunction with another 5) The parking lights will stay On while the RS unit is controlling the engine.
  • Page 2: Valet Override Mode

    VALET OVERRIDE MODE INSTALLATION INSTRUCTIONS Valet Override: The position of the Override switch allows or prevents the RS !! WARNINGS !! unit from being activated. This feature is used when you do not wish the unit to be operated, such as when you leave it with a valet parking attendant, mechanic Do not attempt to install this Remote Car Starter into a manual transmission or if you loan your car to another person.
  • Page 3 Green Wire: Connection Required 12-Gauge Yellow Wire: 12-Gauge Connection Required Connect the Green wire to the vehicle's Starter Motor wire. This wire will show Connect the Yellow wire to the vehicle's Accessory wire. This circuit supplies 12 volts only when the ignition key is in the "Start" position. This wire is also found power to the Heat, Ventilation and Air Conditioning (HVAC) system.
  • Page 4 W I R I N G - 7-WIRE CONNECTOR Black Wire: Connection Required Diagram Connect the Black wire to a very good, clean chassis ground. Recommended areas are to an existing machine thread bolt, either in the driver's kick panel area or a major structural member behind the dash (see diagram #4).
  • Page 5 Control Module Instead of using a pin switch to monitor the hood's open or shut status, an Omega AU-46 Mercury Tilt Switch may used. Connect one of the AU-46's wires to Nega- tive Chassis Ground and connect the remaining wire to the Dark Blue wire.
  • Page 6: Features Programing

    2) Smart Start: 3) Tach Sense: This method uses a voltage sensing circuit which reads the vehicle's voltage be- If the vehicle is generally hard to start (requiring the starter to be engaged for more fore attempting to start, and then monitors for a voltage increase which occurs this method will produce more consistent remote starting.
  • Page 7: Limited Lifetime Warranty

    3-Wire Blue Connector Red = Constant +12 Volts Output parts to be repaired will be free with only a nominal charge for Omega Research and Blue = - Ignition 2 Output Development, Inc.'s labor and return shipping, to the original owner during the lifetime Black = Chassis Ground of the car in which it was originally installed.