Oki OKIPAGE 8c Setup Manual page 9

1. Press the OPEN button and raise the printer top cover to its
fully upright position.
2. Remove any plastic foam plugs from the tops of the four
image drum cartridges (1).
3. Grip the top of an image drum cartridge and lift it straight
up and out of the printer.
Setup Guide
4. Peel off the eight white protective tapes from the belt gears.
5. Pull the protective sheets of paper straight upwards out of
the cartridge.
1
6. Return the drum cartridge to the printer, locating the pins
at each end of the cartridge into their slots (2) at each side
of the printer.
2
9