Oki ML3320 Help Manual page 10

5. Adjust the paper feed guides ( ) for the width of the
paper and place a sheet of paper in the separator. The
paper will feed into the printer.
Note: The standard setting for the Top of Form (where
the printing begins) is 2.54cm down from the top of
the page. To change the setting, see the next column.
Setting the Top of Form (TOF)
When setting the Top of Form, use the red line ( ) on the
paper shield as a reference:
1. Make sure the printer is deselected (SEL light off).
2. Press and hold SHIFT ( ), then:
Press LF ( ) to move Top of Form higher on page
Press FF/LOAD ( ) to move Top of Form lower on
page
SEL
LF
SEL
Micro Feed
SHIFT
MENU
Down
EXIT GROUP
POWER ALARM
FF/LOAD TEAR PARK QUIET
Micro Feed
TOF
Up
ITEM SET PRINT
MENU