Related Manuals for OHIOSTEEL 50SWP26
Summary of Contents for OHIOSTEEL 50SWP26
- Page 1 26 cu. ft. LAWN SWEEPER Patent Pending READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS BEFORE USINGTHIS EQUIPMENT ill l Assembled in U.S.A. of domestic and imported components 6000235-REVA 4/09...
- Page 2 Before usinq your sweeper • Make sure brushes are clean and free of any debris. • Visually inspect sweeper for obvious damage. • Use supplied hairpin cotter with hitch pin provided. • Remove foreign objects from yard before using sweeper. Bag height and brush adjustment...
- Page 3 Carton Contents REF. DESCRIPTION REF. QTY. DESCRIPTION ..QTY. SWEEPER ASSEMBLY FRAME TOP RIGHT FRAME CENTER LEVER HANDLE HEIGHT PLATE HOPPER BAG BAR PIVOT ..CLEVIS PLATE FLAT CLEVIS PLATE BENT REAR BAG SUPPORT HOPPER BAG HOPPER CONNECT TUBE FRAME BOTTOM LEFT HITCH TUBE...
- Page 4 Hardware Contents ......iiii,,11,,, REF. DESCRIPTION DESCRIPTION QTY. REF. QTY. 3/8"-16 X 3-1/2" HEX BOLT 3/8">< 1/2" CLEVIS 3/8"-16 X 2-3/4" HEX BOLT 3/8" X 1-1/4" CLEVIS 3/8"-16 X 2" HEX BOLT 3/8" USS FLAT WASHER 3/8"-16 X 1" HEX BOLT 5/16"- NYLON LOCKNUT PIVOT...
- Page 5 Hitch Assembly NOTE: MAKE SURE HEIGHT ADJUSTMENT PLATE IS ABOVE HEIGHT ADJUSTMENT TUBE WHEN ASSEMBLING. Step Attach hitch mount tubes (26) to sweeper assembly using 3/8"-16 x 2" hex bolts (27) curved washers (28). Secure with flat washers (60) nylon lock nuts (29).
- Page 6 Clevis Height Lever Assembly Step Attach clevis pieces (5 & 6) as shown in the detail view making sure to insert clevis bolts (30) between hitch bolts (32) as shown. Step Attach height adjustment lever (3) to height adjustment (2) with 3/8"...
- Page 7 Hopper Bag and Frame Assembly TOP ASSEM BLY_.._._i PIVOT ROD BO]-I-OM ASSEMBLY_-..._._ HOPPER BAR POCKET Step 6. Build bottom assembly. Connect bottom left tube (40), center tube (44), and bottom right tube (41). Slide hopper bag bar (45) into the pocket provided on front bottom...
- Page 8 Connecting Bag to Sweeper Step Insert hopper connect tubes (55) into hitch mount tubes (26) as shown lock place with 3/8" ring grip pins (54). Page 8.
- Page 9 Sweeper Repair Parts List 50SWP26 REF NO PART NO DESCRIPTION REF NO PART NO DESCP_PTION 6000207 6000192 SWEEPER ASSEMBLY [1/4"-20 X 1" HE_{ BOLT 307119 HEIGHT 3000716 AD]USTMENT (INCL'36). 1/4" USS FLAT WASHER 307181 300065 1/4_'-20 LOCK NUT LEVER HANDLE (INCL#35)
- Page 10 Hopper Repair Parts List 50SWP26 QT¥ REF NC PART NO DESCRIPTION REF NO PART NO QTY DESCRIPTIO'N " 307083 HAIR PIN COTTER 307044 PIVOT ROD PLATE 307332 HOPPER BAG 3000818 3/8" X 1/2" CLEVIS PIN,,, 307071 FRAME BOTT'OM LEFT 3000820 I/4"X...
-
Page 11: Warranty
1-800-652-2321. When ordering repair parts, always give the following information" • Product 26 CU.FT. LAWN SWEEPER • Model Number- 50SWP26 Part Number • • Part Description • Found on the repair part list. Reference pages 9 & 10. -
Page 12: Quick Reference
QUICK REFERENCE GUIDE D ETERM-I-NiNG SWEEP-E--R-BRUSH H EIG HT ..For optimal performance: • Mow grass while sweeping, especially when leaves are present. Set brush height 1/2" down into the grass. A common misconception is that the lower the brush setting the better will sweep,... - Page 13 TOP EDGE OF SHEET = Ii" i0" HH, H / ....T.._. A = 7"TO 8" B = 8"TO I0" C = I0" TO 11" _ ... reor hifch hole ///" With tractor/riding mower on a flat, level surface; position this sheet...
- Page 14 www.ohiosteeLcom (800) 652-2321...