Related Manuals for OHIOSTEEL 46SWP24
Summary of Contents for OHIOSTEEL 46SWP24
- Page 1 46SWP24 24 cu ft LAWN SWEEPER U.S. Patent No. 7,610,646 READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT 6003118 - REV C 7/19...
-
Page 2: Safety Rules
Safety Rules This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Read and understand all safety rules and operating instructions before using this tractor attachment. -
Page 3: Warranty
Paint that is worn or faded due to normal use or exposure. To arrange for product repair visit ohiosteel.com/customer-support and fill out the warranty repair form. You can also call 1-800-652-2321, ext. 212 to speak to our Customer Service Team This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. -
Page 4: Tools Required For Assembly
Carton Contents 3 (x1) 4 (x1) 5 (x2) (x1) 6 (x2) 18 (x2) 19 (x2) 20 (x4) 22 (x11) 21 (x10) 23 (x2) 24 (x2) 26 & 48 (x8) 27 (x4) 25 (x3) 36 (x2) 37 (x1) 39 (x2) 38 (x2) 40 (x2) 41 (x1) 42 (x1) - Page 5 Assembly Instructions Attach Hitch Mount Tubes (19) to Sweeper Assembly and tighten hardware. DO NOT OVERTIGHTEN. Attach Handle (3) to Height Adjustment (2) and tighten hardware. Insert Hitch Tubes (18) into Hitch Mount Tubes (19) and snap into position.
- Page 6 Assembly Instructions Install hardware through front two holes of Hitch Tubes as shown. DO NOT TIGHTEN AT THIS TIME. Hold Adjustment Lever (4) in position and install third bolt through Lever as shown. Pin Adjustment Lever to Handle with Hair Pin (26). SHOWN INSTALLED DO NOT TIGHTEN AT THIS TIME.
- Page 7 Assembly Instructions Install Clevis Bars as shown (5 & 6); Clevis bolts (23) pass between Hitch Tube bolts. Tighten Hitch Tube hardware first, then tighten Clevis hardware. Insert Bottom Frame Tubes (38) into Center Frame Tube (40) and snap into position. (Note that snap buttons are oriented up) Snap Button...
- Page 8 Assembly Instructions Unroll and flatten hopper bag (37) from shipping state. Then, slide Hopper Stop Bar (43) into pocket of Hopper Bag as shown. First, place bottom frame assembly into bottom of Hopper Bag (37). Second, Install Clevis Pins (45) through Hopper Bag (37), Hopper Stop Bar (41), and Bottom Frame Tubes (38) then secure with Hairpins(48).
- Page 9 Assembly Instructions First, Place top frame assembly into Hopper Bag (37). Second, Install Clevis Pins (44) through Top Frame Tubes (39) and Bottom Frame Tubes (38) and secure with Hairpins (48). Snap Button Down Slide Hopper Pivot Rod (42) through Top Frame Tube (39) and Connecting Tube (36), then through pocket of Hopper Bag (37), and then through both Connecting Tube (36) and Top Frame Tube (39) on other side.
- Page 10 Assembly Instructions First, unscrew Thumb Screw from Tension Tube Assembly (41). Next, Hold Hopper Bag (37) open and carefully insert Tension Tube Assembly (41) through opening in Hopper Bag and into hole in bottom Center Frame Tube (40). Pull top Center Frame Tube over tension tube and align holes.
- Page 11 Assembly Instructions Insert Connecting Tubes (36) into Hitch Mount Tubes (19) and secure with Quick-Release Pins (47). Install Hitch Pin (49) and secure with Hairpin (48). Tie Dump Rope (51) securely around exposed section of Center Frame Tube (40). Do NOT fasten rope to any part of your body or clothing.
- Page 12 Operating Instructions Before Using Lawn Sweeper: Read all Safety Rules found on page 1. How to Sweep Lawn: Remove large debris from lawn. Do not sweep if conditions are too wet or muddy. Attach Lawn Sweeper to tractor using supplied hitch pin. The multi-pronged hitch allows the Lawn Sweeper to accomodate varying tractor hitch heights;...
- Page 13 Operating Instructions Storing Lawn Sweeper: Empty hopper bag and thoroughly clean Lawn Sweeper before storing. Store Lawn Sweeper away from excessive heat to prevent damage. Brushes must not contact ground during storage to prevent damage. Remove quick-release pins to separate hopper bag from Lawn Sweeper. Carefully remove tension tube and collapse hopper bag for compact storage.
-
Page 14: Repair Parts
PINION ASSEMBLY, RIGHT 3000721-ZC WASHER, 3/4" SAE PINION ASSEMBLY, LEFT 6000828 3000539-ZC 1/4" -20 X 1-1/4" BOLT BEARING ASSEMBLY 3000716-ZC WASHER, 1/4" SAE 6000540 WHEEL BUSHING 300065-ZC 1/4" -20 LOCK NUT 6000222-ZC SNAP BUTTON 6002320-B2 TUBE, HITCH ohiosteel.com/partstore OHIO STEEL INDUSTRIES1-800-652-2321... - Page 15 BOTTOM FRAME TUBE 3/8" USS FLAT WASHER TOP FRAME TUBE QUICK-RELEASE PIN 307133 6004287-B2 CENTER FRAME TUBE HAIRPIN TENSION TUBE ASSEMBLY HITCH PIN 6002318-B2 HOPPER PIVOT ROD 6000208-ZC SNAP BUTTON 6002316-B2 HOPPER STOP BAR 307361 DUMP ROPE ohiosteel.com/partstore OHIO STEEL INDUSTRIES1-800-652-2321...
- Page 16 Designed And Tested In Columbus, Ohio Assembled In The U.S.A. From U.S.A. And Asia Components MODEL # 46SWP24 2575 Ferris Road Columbus, OH 43224 (800) 652-2321 www.OHIOSTEEL.com (800) 652-2321...