Related Manuals for OHIOSTEEL 42LS
Summary of Contents for OHIOSTEEL 42LS
- Page 1 42LS 18 cu. ft. LAWN SWEEPER READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT Assembled in U.S.A. of domestic and imported components 6000527-REV C 6/10...
-
Page 2: Safety Rules
Safety Rules This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Read and understand all safety rules and operating instructions before using this tractor attachment. -
Page 3: Carton Contents
Carton Contents (x1) 46 (x1) 45 (x1) 47 (x2) 39 (x1) 40 (x2) 42 (x2) 25 (x2) 26 (x2) 44 (x2) 55 (x2) 57 (x1) 5 (x2) 17 (x1) 3 (x1) 4 (x1) 6 (x2) 50 (x2) 31 (x2) 49 (x2) 53 (x2) 38 (x8) 27 (x4) - Page 4 Assembly Instructions Attach Short Hitch Tubes to Sweeper Assembly and tighten hardware. DO NOT OVERTIGHTEN. Attach Handle to Height Adjustment and tighten hardware. Insert Long Hitch Tubes into Short Hitch Tubes and snap into position.
- Page 5 Assembly Instructions Install hardware through front two holes of Long Hitch Tubes as shown. Hold Adjustment Lever in position and install third bolt as shown. Pin Adjustment Lever to Handle. DO NOT TIGHTEN AT THIS TIME. Install Clevis Bars as shown; Clevis bolts pass between Hitch Tube bolts. Tighten Hitch Tube hardware first, then tighten Clevis hardware.
- Page 6 Assembly Instructions Slide Hopper Bar into pocket of Hopper Bag as shown. Place bottom frame assembly into Hopper Bag. Install Clevis Pins through Hopper Bag, Hopper Bar, and Bottom Frame Tubes and secure with Hairpins. Insert Top Frame Tubes into Rear Frame Tube and snap into position.
- Page 7 Assembly Instructions Place top frame assembly into Hopper Bag. Install Clevis Pins through Top Frame Tubes and Bottom Frame Tubes and secure with Hairpins. Slide Pivot Rod through Top Frame Tube and Connecting Tube, then through pocket of Hopper Bag, then through Connecting Tube and Top Frame Tube. Secure both ends with Washer and Hairpin.
- Page 8 Assembly Instructions Insert Connecting Tubes into Short Hitch Tubes and secure with Quick-Release Pins. Install Hitch Pin and secure with Hairpin. Tie Dump Rope securely around exposed section of Rear Frame Tube.
- Page 9 Operating Instructions Before Using Lawn Sweeper: Read all Safety Rules found on page 1. How to Sweep Lawn: Remove large debris from lawn. Do not sweep if conditions are too wet or muddy. Attach Lawn Sweeper to tractor using supplied hitch pin. The multi-pronged hitch allows the Lawn Sweeper to accomodate varying tractor hitch heights;...
- Page 10 Operating Instructions Storing Lawn Sweeper: Empty hopper bag and thoroughly clean Lawn Sweeper before storing. Store Lawn Sweeper away from excessive heat to prevent damage. Brushes must not contact ground during storage to prevent damage. Remove quick-release pins to separate hopper bag from Lawn Sweeper. Carefully remove tension rods and collapse hopper bag for compact storage.
-
Page 11: Warranty
United States. In the space below record the purchase date of your Lawn Sweeper. Model Number 42LS Purchase Date Keep this Owner's Manual and your receipt in a safe place for future reference. After the two year warranty period all replacement parts may be ordered by calling 1-800-652-2321 . -
Page 12: Repair Parts
Repair Parts 4 38 23 24... - Page 13 Repair Parts...
- Page 14 (800) 652-2321...