Adjust Doors - Frigidaire 242292000 Use & Care Manual

L veiing Freezer Drawer necessaw)
i Check gasket seal around top, bottom, and sides of
freezer drawer.
If gasket is not sealed, open drawer and slightly
loosen four drawer screws (two on each side) to
allow drawer to rotate.
Close drawer and recheck the seal on the gasket
(A). Open the drawer grabbing by the sides in the
center (B). Be careful not to rotate the drawer.
Remove Hex
Head Drawer
Screw
Screw
Remove Hex
Head Drawer
Remove Hex
Head Drawer
Screw
4 Tighten four drawer screws.
5 Recheck gasket seal.
Push Against
Freezer Drawer
Levem Refrigerator & Adjust Doors
(if necessary)
Guidelines for final positioning of your refrigerator;
o All four corners of the cabinet must rest firmly on
the floor.
The sides should tilt 1/4inch (6 mm) from front to
back (to ensure that doors close and seal properly).
Doors should align with each other and be level.
Most of these conditions can be met by raising or
Lowering the adjustable front rollers.
To _eve_ the cabinet using the front rollers
(select medens):
I Slightly open freezer drawer. Lift t he toe grille and
gently pull forward (see illustration).
2 You can raise or lower each door. Use a 3/8inch
socket wrench to turn the adjustment screws (one
per side).
Must
Fit in Slot on / li_ X
) Anti:flpBracket l_ _
Screw/Washer _1_/_
Assembly \_
(3) Retaihing Cl _ i
To raise: turn adjustment screw clockwise.
To mower: turn adjustment screw counterclockwise.
3
4
Ensure both doors are bind-free with their seals
touching the cabinet on all four sides and that
cabinet is stable.
After unit is leveled, lower anti-tip leg until it
contacts the floor.
o
o
° Doe Door °
oo
o
o
5 ]:nstalI the toe grille by fitting into place.