Table of Contents
Advertisement
I Solving Common
Problems
Before
contacting
an authorized
service center,
perform
the following
simple
checks.
They may save you the time and expense
of an unnecessary
call.
Problem
The air conditioner
does
not operate at all
Explanation I Solution
t
Check that the circuit breaker used for the air conditioner has not been
triggered.
t
Check that the power cable is plugged into a wall socket and the socket is
switched on, if necessary.
t
Check that the temperature indicator on the unit is lit; if necessary,
press the (._ (On/Off) button on the remote control or unit.
The air conditioner does not
t
Check that there are no obstacles between you and the unit.
operate with the remote
t
Replace the remote control batteries if necessary.
control
t
Check that you are close enough to the unit.
No beep is heard when you
t
Check that you are pointing the remote control at the remote control sensor
press the _ (On/Off) button
on the unit.
on the remote control
t
Replace the remote control batteries if necessary.
The air conditioner does not
cool
t
Check that the correct operating mode has been selected(Cool).
t
The room temperature may be too low.
t
Dust may be blocking the air filter; refer to page 22 for cleaning instructions.
t
Check that there is no obstacle blocking the air flow into or out of the unit.
The timer is not correctly
triggered
t
Check that the timer has been programmed correctly;
refer to page 16~18.
Odors are permeating the
room during air conditioning
_, Ventilate the room
Technical
Specifications
Design and specifications
are subject to change without
notice.
Model
Power Supply
SP06
SP08
SP10
SP12
115V~,60Hz
Advertisement
Table of Contents
