Ventilating
Your Room
ff the air in your room is stale, you can ventilate the room using the Fan feature.
1
If you wish to discharge stale air, push the ventilation lever on the front of the
unit to the right and open position ( _
).
Result:
• The air inside the room circulates and stale air is discharged
outside.
Otherwise, push the ventilation lever to the left and closed position ( -_
).
Result:
• The air simply circulates inside the room.
If necessary, press the _ (OnlOf0 button.
•
The air conditioner starts up in the mode selected when
the unit was last used.
•
The unit beeps twice.
Ifthe fan speed(F1, F2 or F3) is not displayedon the control panel:
• Pressthe (_ buttonon the unit one or more times untilthe fan speed
(F1, F2 or F3) is displayed.
Result.' • The unit beeps eachtime you press the (_
button.
• The air conditionerstarts up inthe Fan mode.
Youcan change modes at any time.
When the air conditioneris in the Fan mode,the temperature
cannot be set or displayed.
4
iiiiiiiiiiiiiiiiiiiiiiiiiiiiii
To set the fan speed:
• Press the (_
button on the unit one or more times until the
desired fan speed(F1,
F2 or F3) is displayed.
F I
LOW
F _-=
Medium
F 3
High
To control the direction of the air flow, refer to page 20.