Static Ip Address; Pppoe (Ppp Over Ethernet); Pptp; L2Tp - Edimax BR-6204WG User Manual

2.2.2 Dynamic IP
Choose the Dynamic IP selection if your ISP will automatically give you an
IP address. Some ISP's may also require that you fill in additional
information such as Host Name, Domain Name and MAC address (see
chapter 1 "Cable Modem" for more detail)

2.2.3 Static IP Address

Select Static IP address if your ISP has given you a specific IP address for
you to use. Your ISP should provide all the information required in this
section. (See chapter 1 "Fixed IP" for more detail)

.2.2.4 PPPoE (PPP over Ethernet)

Select PPPoE if your ISP requires the PPPoE protocol to connect you to
the Internet. Your ISP should provide all the information required in this
section. (See chapter 1 "PPPoE" for more detail)

2.2.5 PPTP

Select PPTP if your ISP requires the PPTP protocol to connect you to the
Internet. Your ISP should provide all the information required in this section.
(See chapter 1 "PPTP" for more detail)

2.2.6 L2TP

Select L2TP if your ISP requires the L2TP protocol to connect you to the
Internet. Your ISP should provide all the information required in this section.
(See chapter 1 "L2TP" for more detail)

2.2.7 Telstra Big Pond

Select Telstra Big Pond if your ISP requires the Telstra Big Pond protocol
to connect you to the Internet. Your ISP should provide all the information
required in this section. Telstra Big Pond protocol is used by the ISP in
Australia. (See chapter 1 "Telstra Big Pond" for more detail)
39