Dynamic Ip; Static Ip Address; Pppoe (Ppp Over Ethernet) - Edimax Wireless Broadband Router User Manual

Parameters
2.2.1 Dynamic IP address

2.2.2 Static IP address

2.2.3 PPPoE
2.2.4 PPT P
2.2.5 L2TP
2.2.6 T elstra Big Pond
connection.
2.2.7 DNS
2.2.8 DDNS
Once you have made a selection, click <More Config uration> at the
bottom of the screen and proceed to the manual's relevant sub-section

2.2.1 Dynamic IP

Choose the Dynamic IP selection if your ISP will automatically give you an
IP address. Some ISP's may also require that you fill in additional
information such as Host Name, Domain Name and MAC address (see
chapter 1 "Cable Modem" for more detail)
2.2.2 Static IP Address
Select Static IP address if your ISP has given you a specific IP address for
you to use. Your ISP should provide all the information required in this
section. (See chapter 1 "Fixed IP" for more detail)
.2.3 PPPoE (PPP ov er Ethernet)
Select PPPoE if your ISP requires the PPPoE protocol to connect you to
the Internet. Your ISP should provide all the information required in this
section. (See chapter 1 "PPPoE" for more detail)
Description
Your ISP will automatically give you an IP
address
Your ISP has given you an IP address
already
Your ISP requires PPPoE connection.
Your ISP requires you to use a Point-to-Point
T unneling Protocol (PPT P) connection.
Your ISP requires L2T P connection.
Your ISP requires T elstra Big Pond
You can specify a DNS server that you wish
to use
You can specify a DDNS server that you wish
to use and configure the user name and
password provided by you DDNS service
provider.
32