L2Tp - Edimax BR-6204WG User Manual

Click <OK> when you have finished the configuration above.
Congratulations! You have completed the configuration for the PPTP
connection. You can start using the router now, if you wish to use some of
the advance features supported by this router see chapter 2, 3, 4.

1.5 L2TP

Select L2TP if your ISP requires the L2TP protocol to connect you to the
Internet. Your ISP should provide all the information required in this section.
Parameter
Obtain an IP address The ISP requires you to obtain an IP address by
DHCP automatically before connecting to the L2TP
server.
MAC Address Your ISP may require a particular MAC address in
order for you to connect to the Internet. This MAC
address is the PC's MAC address that your ISP
had originally connected your Internet connection to.
Type in this MAC address in this section or use the
"Clone MAC Address" button to replace the WAN
MAC address with the MAC address of that PC
(you have to be using that PC for the Clone MAC
Address button to work). To find out the PC's MAC
address see Appendix A. (see Glossary for an
explanation on MAC address)
Description
26