Temp Control - Kenmore 41003 Use & Care Manual

Temp Control
The temperature control allows you to set the freezer and
the refrigerator temperatures. Use the following instructions
to change and set these temperatures.
1. Press the Home button. The display screen will show
the "Home" screen.
Slide
Show -I
Accent I.,I
Lighting
Water
2. Touch the Temp Control button on the touch screen.
NOTE: When ice cream is stored at a temperature
above 4°F (-16°C) in the freezer, it may melt.
3. Choose the desired freezer and/or refrigerator
temperatures using the < and > buttons to the left and
right of the currently set temperatures.
,
Touch the OK button(s) under the new temperature(s)
to set and save the setting(s).
NOTES:
• The freezer or refrigerator temperature may change
depending on the door opening/closing frequencies,
the food quantity, the ambient temperature, etc.
• Temperatures vary at each food storage section in the
freezer and refrigerator compartments.
When power comes back after a short outage and the
refrigerator temperature is lower than 42°F (6°C), the
refrigerator and freezer will adjust to the last
temperatures that were set. If the refrigerator
temperature is higher than 42°F (6°C), it will revert
back to the default temperatures of 38°F (3°C) and
-2°F (-19°C) respectively.
• Changing a temperature setting requires 3-4 hours for
the stored food to reach the new temperature setting.
• See page 28 for important icemaker operating
information.
NOTE: The freezer temperature can be set between
8°F (-13°C) and -14°F (-26°C). The refrigerator
temperature can be set between 46°F (8°C) and
34°F (1°C). The default freezer and refrigerator
temperatures are -2°F (-19°C) and 38°F (3°C)
respectively.
27
DA99 01746C(t_N+ES).indd 27 2012.6.8 2:13:10 P_[