Table of Contents
Advertisement
Lan Control Settings
Press the ENTER/SELECT button to enter the Lan Control Settings sub menu.
I
TEM
Control By
Network State
Press the ◄► buttons to select projector remote command control.
Selecting RJ45 enables RJ45 control and disables the RS232 port.
Selecting RS232 enables RS232 control and disables the RJ45 network port.
When RS232 control is enabled, the serial port settings are fixed to:
9600 Baud;8-bits;No parity;1 Stop-bit;No flow control
(Range: RS232/ RJ45)
Note: this setting changes the standby power:
RS232 = <1W (Default)
RJ45 = <10W
Press the ENTER/SELECT button to enter the Network State sub menu.
See Network State on page 24.
DLP Projector – User's Manual
D
ESCRIPTION
– 23 –
Hide quick links:
Advertisement
Table of Contents
