Led Error Messages; Image Problems - InFocus IN3118HD User Manual

IN3118HD User's Manual

LED Error Messages

E C
RROR ODE
Powered on
Powering up
Cooling down
Over Temperature
Thermal Break Sensor error
Lamp error/Color wheel control error
Lamp End of lamp life detected
Burner Fan error
Lamp Fan error
Power Fan error
DMD Fan error
Case Open
DMD error/Ignition failed
Color wheel error
In the event of an error, please disconnect the AC power cord and wait for one (1) minute before re-
starting the projector. If the POWER or LAMP LEDs are still blinking or the TEMP LED is lit, contact
InFocus Technical Support at www.infocus.com/support.

Image Problems

Problem: No image appears on the screen
1. Verify the settings on your notebook or desktop PC.
2. Turn off all equipment and power up again in the correct order.
3. Many laptops do not automatically turn on their external video port when a projector is
connected. Usually a key combination like FN + F8 or CRT/LCD key turns the external
display on and off. Locate a function key labeled CRT/LCD or function key with a monitor
symbol. Press FN and the labeled function key simultaneously.
Problem: The image is blurred
1. Adjust the Focus on the projector.
2. Press the Auto Image button on the remote control or the Re-sync button on the keypad.
3. Ensure the projector-to-screen distance is within the 10-meter (33-feet) specified range.
4. Check that the projector lens is clean.
Problem: The image is wider at the top or bottom (trapezoid effect)
1. Position the projector so it is as perpendicular to the screen as possible.
2. Use the Keystone button on the remote control or projector to correct the problem.
Problem: The image is reversed
Check the Projection setting on the Setup >> Basic menu of the OSD.
M
ESSAGES
P LED
OWER
Solid Green
Solid Green
Solid Green
OFF
Flashes Green 4x
Flashes Green 5x
Flashes Green 5x
Flashes Green 6x
Flashes Green 6x
Flashes Green 6x
Flashes Green 6x
Flashes Green 7x
Flashes Green 8x
Flashes Green 9x
– 38 –
L / R LED
AMP EADY
Solid Red
Flashing Red
Flashing Red
OFF
Flashes Green 4x
OFF
Flashes Green 3x
Flashes Green 1x
Flashes Green 2x
Flashes Green 3x
Flashes Green 4x
OFF
OFF
OFF
T LED
EMP
OFF
OFF
OFF
Solid Red
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF