Table of Contents
Advertisement
USING THE MRPJECTPR
Change Massword
Sets or modifies the security password.
Note:
Password default value is "1234" (first time).
Setup HDII CEC menu
Note:
‡
When you connect HDMI CEC-compatible devices to the projector with HDMI cables, you can control
them on the same power on or power off status using the HDMI Link control feature in the projector's
OSD. This lets one device or multiple devices in a group power on or power off via HDMI Link Feature
in a typical configuration, your DVD player may be connected to the projector through an amplifier or
home theater system.
HDII CEC
Default is Off. Select "On" to enable HDMI CEC function.
Setup HDBaseT control settings menu
Ethernet
Enable or disable the Ethernet feature.
‡
Pn: Choose "On" to enable HDBaseT port connection and disable LAN port connection.
‡
Off: Choose "Off" to use LAN port connection.
RS232
Enable or disable the RS232 feature.
‡
Pn: Choose "On" to enable HDBaseT port connection and disable RS232 port connection.
‡
Off: Choose "Off" to use RS232 port connection.
HDBaseT Iode
Set the HDBaseT mode setting:
Auto: The HDBaseT Rx of projector will automatically switch between HDBaseT mode/ Lower power
‡
mode/Fallback mode when it detects a signal from the HDBaseT port.
‡
HDBaseT: The source must be selected manually.
HDMI
Amplifier
HDMI
DVD Player
39
English
Advertisement
Table of Contents
