Warmer Drawer Humidity Controller; Removing And Replacing The Warmer Drawer; The Dry Heat Position; The Moist Heat Position - Kenmore 790.9505 Use & Care Manual

Hide thumbs Also See for 790.9505:
Table of Contents

Advertisement

Oven
Controls
Warmer
Drawer
Humidity
Controller
This feature
may be used to control
humidity
levels in the
warmer
drawer.
The humidity
control
knob is located
on the
inside front
panel of the warmer
drawer.
To help keep foods
moist, move the handle
to the right. This
closes the vents and helps keep the moisture
insider
the warmer
drawer.
For crisp foods,
move the handle to the left. This opens
the vents and allows
more of the moisture
to escape.
For dry heat: Slide the humidity
control
knob in the direction
of
the "less" arrow
(See Figure 33). This allows
more of the moist
heat to escape
and provides
a dyer environment
for the food
in
the warmer
drawer.
Removing and Replacing the Warmer
Drawer
To remove the warmer
drawer.-
Electrical
shock hazard
can occur and result in
serious injury or death.
Disconnect
appliance
from
electric
power
before
cleaning
and servicing
the warmer
drawer.
1.
Turn power
OFF to the appliance
before
removing
the
warmer
drawer.
2.
Open
the warmer
drawer
completely.
3.
On left warmer
drawer
rail, locate
black
release
lever and
press up with finger
while pulling
out slightly
on the oven
drawer
handle.
On right warmer
drawer
rail, locate
black
release
lever and press down with finger
while pulling
out
slightly
on the warmer
drawer
handle
(See Figure 35).
Left-hand
rail
and
release
\
Figure 33: The dry heat position
For moist heat: Slide the humidity
control
knob in the direction
of the "more"
arrow
(See Figure 34). More
moisture
will remain
in the warmer
drawer
cavity.
This will help keep the food
in the
warmer
drawer
from
drying
out.
Warmer
drawer_
handle
Figure 34:
The moist heat position
Important
note:
For some types of servings, you may want to store previously
prepared
food
in a "dry
heat" environment.
For frequent
controller
adjustments,
slightly
loosen
humidity
controller
knob
and slide to the desired
position.
To maintain
a setting,
adjust
controller
knob into position
and tighten
knob.
Right-hand
rail and release
Figure 35:
Removing
the warmer
drawer
4.
The warmer
drawer
should
now be released
from the rails.
Remove warmer
oven drawer
(using level and square
motion)
completely
out and away
from the appliance.
3O

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Elite 790.9505 series

Table of Contents