Grounding - Kenmore 790.7423 Series Use & Care Manual

IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before using this appliance.
GROUNDING INSTRUCTIONS
Avoid fire hazard or electrical
shock. Do not use an adapter plug, an
extension cord, or remove grounding prong
from electrical power cord. Failure to follow
this warning can cause serious injury, fire or
death.
This appliance is equipped with a 3-prong
grounding plug for your protection against
shock hazard and should be plugged directly
into a properly grounded receptacle. Do not
cut or remove the grounding prong from this
plug.
For personal safety, the range must be
properly grounded. For maximum safety, the
power cord must be plugged into an elec-
trical outlet that is correctly polarized and
properly grounded.
If a 2-prong wall receptacle is the only
available outlet, it is the personal responsi-
bility of the consumer to have it replaced
with a properly grounded 3-prong wall
receptacle installed by a qualified electri-
cian.
Do not under any
circumstance, cut,
remove, or bypass
the grounding prong.
PRODUCT RECORD
In this space below, record the date of
purchase, model and serial number of your
product. You will find the model and serial
number printed on an identification plate.
See Figure 2 for serial plate location.
Model No.
Serial No.
Date of Purchase
Save sales receipt for future reference.
Figure 2: Serial plate location
To locate the serial plate, open storage
drawer (some models) or warmer drawer
(some models). The serial plate is attached to
the lower right oven frame.
Power supply cord
with 3-prong
grounding plug.
Figure 1: Grounding type wall receptacle
See the installation instructions packaged
with this range for complete installation and
grounding instructions.
Save these instructions for future reference.
8