Advertisement
Available languages
Available languages
Brackel Assembly
- Leveling Screw
Ou_or Wail Cans_fuclion
Fig, 18
O o o o o O o o ]
Flg.19
5. Installation of the Cabinet
Ao Place the air conditionercabinet into the window
with the "U' shaped mounting channel (on top)
positioned in front of the upper window sash. The
"U" shaped channel on the bottom of the cabinet
should be positioned in the "recessed" portion of
the track tocated at the front of the window
brackets. Pu_lthe window down until it rests just
behind the front flange of the (top) "U' shaped
mounting channel, See Fig. 14.
Window Sash
"L" Shaped
Foam Slrip
Mounting
Channel
Rg,, 14
B, Align one hole In the bottom of the cabinet with
one hoJeIn the bracket assembly,, Secure the
cabinet to the bracket using a 114"screw
provided. Repeat the same procedure on the
opposite side of the cabinet, Fig. 15
Co Check to make sure the =pitch" (angle) of the
cabine! ts slanted slightly downward on the
outside. If necessary, re-adjust the levelling
screws In the mounling bracket.F/got8
D. Cut the first foam sealing strip to fit the
underside (bottom} of the lower window sash.
Remove the peel-off backing on the foam and
attach the foam strip to the sash. See Fig, 13,
Advertisement
