Advertisement
Available languages
Available languages
LED DISPLAY: The LED window displays the
following information independanllyo
•
Sol Cooling Temperature
•
Ambient Room Temperature
•
Auto cnfoff Timer Programs
,
E1 = (Clean Air Filler)
NOTE: During normal operating conditions, (after all
settings are complete] the LED readout will always
default to show (display) the "ambient room
temperature". In order to view the "set" temperature
of the air conditioner, press either of the temperature
key pads once.
O
POWER SWITCH: turns power ontoff
SWII_G: Activates the automatic air swing
(osclllalion) feature..
(ENERGY SAVER): Press and hold the =SWING"
keypad for 3 seconds 1o activate the ENERGY
SAVER program.This program Is designed to
reduce energy consumption by limiting (restricting)
operation ollhe fan motor with the operation of the
compressor._ t .e.
compressor off I fan off
compressor on / fan on
NOTE:When the ENERGY SAVER feature Is not
selected, the fan motor operates continuously,
even after the compressor (cooling mode) has
cycled off, i.e_
compressor on / fan on
compressor off/fan on
MODE: Aclivates the FAN or COOLING mode
TIMER: Activates the auto start or auto slop timer
program from 0 - 12 hours_ (1 hour increments)
Control Panel for the DAC12003D
RGe
IF_IF
.A
•
POWER
0
JteControl for the DAC12C
_3D
Wail three minutes before adjusting/changing
temperature settings, Adjusling temperatures too
qulckly may cause the compressor overload to
trip, resulting in a blown fuse.,
Fresh Air Ventilation should be kept [n the
=closed" position during air conditioning mode.
Fresh Air Ventilation should be kept in the "open"
position during "fan mode" only when cteafing
smoke and!or odors from the room.
ONE TOUCH: Activates a (factory) pro-set
temperature setting of 22"C(Tt.6_F)o
FAN: Aclivates fan speed settings. (High, Medium,
Low)
A
KEYPAD: Activates (increases) temperature
settings.
V
KEYPAD; Activates (decreases} temperature
settings.
_o
Advertisement
