Kenmore 84082 Operating Instructions

DRYER OPERATING MNSTRUCTNONS
Model 84082/94082
Hill 0
ll_ied= li£h 0
l_le liu_e 0
Lew 0
lle lear 0
l_l_ellr I 0 Ssfflleat 0
£1urleal 0 $£riskQsa_l 0
Les_IrV © Wdslle£11 0
lae_l 0 llcleSilealO
E_dmated
TU_
0£TI0_,IS Select
Before Operating Your Dryer
Read your dryer Owner's Guide. It has important
safety and warranty information. It also has many sug-
gestions for best drying results.
To reduce the risk of fire, electric
shock or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS in your dryer Owner's Guide
before operating this appliance.
6. The changes you make will be remembered the
next time that cycle is selected. See the "Dryer
Settings Chart" for more details.
7. Press START to begin the cycle.
_, To pause the cycle or change settings,
press PAUSE/CANCEL once.To resume
the cycle, press START again.
_, To stop or change the cycle, press
PAUSE/CANCEL twice.
Operating Steps
Read "Drying Procedures" in your Owner's Guide. It
explains these operating steps in detail.
1. Prepare items for drying.
2. Check that lint filter is clean and in place.
3. Load the dryer. If desired, add a dryer fabric
softener sheet. Close the door.
4. Select the cycle and and settings for each load.
5. A suitable drying temperature, dryness level and
options will automatically be displayed for each
cycle. To change the temperature and dryness
level, press TEMP and DRYNESS until the desired
selections are made. To select an option, press
OPTIONS until the indicator for a desired option
flashes and press SELECT. Follow the same
steps to delete an option. If a dryness level or
option is not available for a cycle,it will not light.
8. A signal will sound at the end of the cycle and
periodically during Wrinkle Rid when the Cycle
Signal option is selected. When the cycle
ends,remove items immediately and hang or
fold.
9. Clean the lint filter after every load.
Cycle Selection
Turn the Cycle Selector knob to the desired cycle.
For best results, follow the fabric care label
instructions on items to be dried. To change the
selection after the cycle has begun, press PAUSE/
CANCEL twice,
Auto Dry
Auto Dry cycles take the guesswork out of drying time.
The load will automatically be dried at the selected
temperature to the desired dryness level. The dryer
senses the moisture level of the load as it tumbles
through heated air. Auto Dry cycles save time and
energy and protect fabrics.When the load has reached
the selected dryness level, it will continue to tumble,
#rVisl 0
O_elll0w_ 0
Wri_kls Ril O
lileas Listlill_e_ 0
0 80
©©
STAIT Pause
Cae_el
unheated, during a Coo! Down period. This helps
reduce wrinkling and makes items easier to handle
during unloading.
Drying time varies depending on size and dampness
of load and fabric type. Room temperature and
humidity, type of installation and electrical voltage or
gas pressure can also affect drying time.
Towels
Select this Auto Dry cycle for towel loads.
Bulky
Select this cycle to dry a comforter, blanket, sleeping
bag or similar item.
Normal
Select this Auto Dry cycle for cotton items.
Perm Press
Select this Auto Dry cycle to dry cottons and blends
with a noqron finish.
Sport
Select this Auto Dry cycle to dry small loads of
lightweight, synthetic apparel worn for working out,
running, swimming, cycling, tennis and similar
activities.
Quick
Select this cycle to quickly dry a small load made up of
just a few items. It provides approximately 20
minutes of tumbling followed by a 1g-minute cool down
period.
PN 134464300 (0412)