Advertisement
Setting Oven Controls
Note: The time of clay must first be set in order to operate
the oven.
To Set or Change
the Temperature
for
Baking
The Bake pad controls normal
baking.
The oven can be programmed
to bake at any temperature
from 170°F to 550°F.
To Set the Controls for Normal
Baking
1. Arrange
interior oven racks.
2. Press Bake pad, % - -" will appear,
"BAKE"
will flash in the display.
3. Press A
or V
pad to set the desired
temperature.
The desired temperature
will appear
and "BAKE"
continue
flashing
in the display.
4. Wait
5 seconds. "BAKE"
wiil stop flashing, the oven icon and the actual
oven temperature
will appear
in the display. A
beep will sound once the oven temperature
reaches the desired
baking
temperature.
5. Place food in oven
Pressing Stop pad will cancel the Bake feature
at any time.
To Change the Oven Temperature
after Baking
has Started
1. After the oven has already
been set to bake and the oven temperature
needs to be changed,
press Bake pad. The current
setting will appear
and "BAKE"
start flashing
in the display.
2. Press A
or V
pad to increase or decrease
the set temperature.
3. Wait
5 seconds. "BAKE"
will stop flashing
and remain
in the display. A beep will sound once the oven temperature
reaches the desired baking
temperature.
Note: If the oven was recently
heated
from prior cooking
and has remained
heated, the bake burner symbol
may not show
in the display
immediately
and a beep will sound to show the temperature
has already
been reached.
Oven Baking
tips: Dark or duJJ pans absorb
more heat than shiny bakeware
resulting
in darker browning.
It may be
necessary
to reduce the oven temperature
to prevent over browning
of some foods. Dark pans are recommended
for pies.
Shiny pans are recommended
for cakes, cookies and mufflns. Insulated
pans may increase baking
times.
To Set Control for Continuous Bake or 12 Hour Energy Saving
The Timer Set/Off
pad controls the Continuous
Bake or 12 Hour Energy Saving
Features. The oven control
has a factory
preset built-in
12 Hour Energy Saving feature that will shut off: the oven if the oven control is left on for more than 11 hours
and 59 minutes. The oven can be programmed
to override
this feature
for Continuous
Baking.
To set control
for continuous
baking:
1. Pressand hold Timer
Set/Off
pad for 6 seconds. A beep will sound, "-- -J' will appear
and TUMER will flash in the display.
After 6 seconds, "12h" or % -h" will appear
in the display
and the control
will beep once.
2. Press A
or v
pad to switch between
the 12 Hour Energy Saving and continuous
bake features.
Note: "12h" in the display
indicates the control
is set for the 12 Hour Energy Saving mode and % -h" indicates the control
is set for the Continuous
Bake feature.
3. Wait
5 seconds to accept
the change
(display
wiJJ return to time of day) or press Stop pad to reject the change.
To Set Control
for Oven
Lockout
The _o°V_o%_
pad controls the Oven Lockout feature.
The Oven Lockout feature
automatically
locks the oven door and prevents
the oven from being turned on. It does not disable
the clock, Kitchen Timer or the interior oven lights. The ovens can be
Jacked individually.
To activate
the Oven Lockout feature
Make sure the oven door is dosed and the oven is turned OFF. Press and hold L%_uT pad for 3 seconds. After 3 seconds a beep
will sound, "DOOR",
"LOCKED"
will flash, "Loc" and _ will appear
in the display. Once the oven door is locked the "DOOR"
and "LOCKED"' indicator will stop flashing
and remain in the display.
To reactivate
normal oven operation
Press and hold _o°_"_, pad for 3 seconds. A beep will sound. The oven icon, "LOC" and _
will disappear
from the display.
"DOOR"
and "LOCKED"
will flash in the display
until the oven door has completely
unlocked.
The appliance
is again
fully
operational.
Note: Because you can set the oven lockout individually, one oven can be used when the other one is locked out.
13
Advertisement
