Download Print this page

Kenmore 790.7802 Series Use & Care Manual page 12

Double oven gas range
Hide thumbs Also See for 790.7802 Series:

Advertisement

Setting Oven Controls
Changing
Between
12 or 24 Hour Time of Day Display
1.
Press and hold (_
pad for 6 seconds. "CLO" and the current time of day will appear
in the display.
A
beep
will sound
and "12h" or "24h"
wiii appear
in the display.
2.
Press A
or V
pad to switch between the 12 and 24 hour time of day display. The display will show either "12h" or "24h".
3.
Wait 5 seconds to accept
the change or press pad to reject the change.
4.
Reset the correct
time as described
previously
in To set the Clock.
Please note that if the 24 hour time of day mode was
chosen, the clock will now display
time from 0:00 through
23:59 hours.
To Set the Timer
The Timer Set/Off
pad controls the Timer feature.
The Timer serves as an extra timer in the kitchen
that wiii beep when the
set time has run out. It does not start or stop cooking.
The Timer feature
can be used during
any of the other oven control
functions,
except
during
a self clean operation.
To set the Timer
1.
Press Timer Set/Off
pad. "-- --" wiii appear
and "TIMER" wiii flash in the display.
2.
Press A
or V
pad to set the desired time in the display.
Wait 5 seconds and the time wiii begin to count down with
the set time and "TIMER"
wiii stay in the display.
3.
When the set time has run out, "End" and "TIMER"
will show in the display.
The clock will beep 3 times every 7 seconds
until Timer Set/Off
pad is pressed.
To cancel the Timer
before the set time has run out: Press Timer Set/Off
pad. The display
will return to the time of day.
To Set Add 1 Minute
Feature
The Add I Minute
pad is
used
to set the Add 1 Minute feature.
When the Add I Minute
pad is pressed, 1 minute is added
to
the Kitchen Timer feature
if this feature
is already
active.
If the Kitchen Timer feature
is not active and the Add |
Minute pad is pressed, the Kitchen Timer feature
will become
active and will begin counting
down from 1 minute.
Temperature
Conversion
(Fahrenheit/Celsius)
The Broil pad controls the Fahrenheit
or Celsius temperature
display
modes. The oven control can be programmed
to display
temperatures
in Fahrenheit
or Celsius. The oven has been preset at the factory
to display
in Fahrenheit.
Note: both ovens will
be changed
at the same time.
To change
dlsplay from Fahrenheit
to Celsius or Celsius to Fahrenheit
1.
Press Broil pad and hold for 6 seconds. A beep will sound, "---" will appear
and "BROIL" will flash in the display.
After
6 seconds a beep wiii be heard and "F" or "C" wiii appear
in the display.
If "F" appears,
the display
is set to show
temperatures
in Fahrenheit.
If "C" appears,
the display
is set to show temperatures
in Celsius.
2.
Press A
or V
pad to switch between
Fahrenheit
or Celsius display
modes. The display
wiii show either "F" or "C".
3.
Wait 5 seconds to accept
the change or press Stop pad to reject the change.
For a sitent control
panel
The Delay
Start pad controls the Silent Control Panel feature.
The Silent Control
Panel feature
allows the oven control to be
operated without
sounds or beeps whenever
necessary. If desired the control
can be programmed
for silent operation and
later returned
to operating
with all the normal
sounds and beeps.
To change
control
from normal sound operation
to silent control
operation
1.
Press and hold Delay
Start pad for 6 seconds. A beep will sound, %- -J' will appear,
"DELAY" will flash in the display.
After 6 seconds, a beep will sound and "SP" (speaker)
or % J' will appear
in the display.
2.
Press A
or V
pad to switch between
normal
sound operation
and silent operation
mode. If "SP"0 appears,
the control
will operate
with normal sounds and beeps. If % J' appears,
the control is in the silent operation
mode.
3.
Wait 5 seconds to accept
the change or press Stop pad to reject the change.
Note: The control
will always
beep at the end of a minute timer and will beep when a set temperature
has been reached,
even if the control
is set to silent operation.
To Operate
the Oven Light(s)
©
The interior
oven light(s) will automatically
turn ON when the oven door is opened.
Press _ to turn the interior
light(s) ON
and OFF whenever
the door is dosed.
12

Advertisement

loading

This manual is also suitable for:

790.7803 series