Kenmore 795.6997 Series Use & Care Manual page 12

REVERSE AND REATTACH REFRIGERATOR D OOR
• Using a 1A-inch socket wrench, loosen and remove °
Hinge Pin from the Middle Hinge Pin Bracket.
Remove washer underneath the middle hinge and •
set aside
NOTE: At this point the door will be loose, lift up o
door slightly and remove it. (Fig. 20 and 20a).
Fig. 20a
Loosen and remove the 2 bolts and the
phillips head screw to remove the Middle
Hinge Bracket from refrigerator housing
(Fig. 21). Set parts aside.
REMOVE base grill.
See BASE GRILL INSTRUCTIONS on page 8.
Remove the washer from the Bottom Hinge
Pin (Fig. 22).
Using a 1A-inch socket wrench, loosen and remove
the Hinge Pin from the Bottom Hinge. Reattach
the Hinge Pin to the opposite side of the Hinge
(see Fig. 22 and 22a). NOTE: This is easier to do
while the Hinge is still attached.
Fig. 22
22a
Using 10mm or 13/32-inch socket wrench
with 2-inch extension, loosen the 3 bolts
and remove the Bottom Hinge from right
side of housing (Fig. 23).
12