Table of Contents
Advertisement
General Care &
Door Hinge locations with
oven door fully open
Fig. 2
Oven
Cleaning
Removing
and Replacing
the Lower Oven
Lift-Off
Door
_The
door is heavy. For safe, temporary
storage,
lay the door flat
with the inside of the door facing
down.
To Remove Oven Door:
1.
Open
oven door completely
(horizontal
with floor
- See F:ig. 1).
2.
Pull the door hinge locks on both left and right door hinges down from the
oven frame
completely
towards
the oven door (See Fig. 2). A tool such as a
small flat-blade
screwdriver
may be required.
3.
Firmly grasp
both sides of oven door along
the door sides (Do not use the
oven door handle
- See Fig. 3).
4.
Close the door to the broil stop position
(the oven door will stop into this
position
just before
fully closing).
5.
With
the oven door in the broil stop position,
lift the oven door hinge arms
over the roller pins located
on each side of the oven frame
(See Fig. 4).
/
/
To Replace
Oven Door:
1.
Firmly grasp
both sides of oven door along
the door sides (Do not use the
oven door handle
- See Fig. 3).
2.
Holding
the oven door at the same angle as the removal
position,
seat the
hook of the hinge arm over the roller pins located
on each side of the oven
door frame
(See Fig. 4). The hook of the hinge arms must be fully seated
onto the roller pins.
3.
Fully open the oven door (horizontal
with floor
- See Fig. 1).
4.
Push the door hinge locks up towards
and into the oven frame
on both left
and right oven door
hinges (See Fig. 2) to the locked
position.
5.
Close the oven door.
Speclal Door Care Instructlons
- Most oven doors contain
glass that can break.
Read the following
recommendations:
1.
Do not close the oven door until all the oven racks are fully in place.
2.
Do not hit the glass with pots, pans, or any other object.
3.
Scratching,
hitting,
jarring or stressing the glass may weaken
its structure
causing
an increased risk of breakage
at a later time.
Roller pin
Hinge arm
hook
e arm
notch
Slot bottom
Fig. 4
26
Advertisement
Table of Contents
