Kenmore 397909A Owner's Manual page 24

END OF CYCLE SIGNAL CONTROL
Your dryer sounds a signal when
a drying cycle is finished. The signal
is helpful when you are drying
permanent press, synthetics, and
other items. These items should be
removed from the dryer as soon as
it stops in order to prevent wrinkles.
• The volume of the signal can be
adjusted.
SIGNAL
ENDOFCYCLE
LOW
e
OFF_ HI6H
PUSH TO START BUTTON
Use this control to start the dryer.
Be sure the dryer door is closed.
Opening the door stops the dryer. It
will not start again until you close the
door and press the PUSH TO START
Button, Be sure the Cycle Selector
Control (Timer) is still on a drying cycle
or air setting.
PUSH TO START
©
• The variable control lets you select a
volume anywhere from OFF to HIGH.
LOW
HIGH
24