Installing Virtual Server; Virtual Server Web Application - NEC Express 5800 Quick Start Manual

Fault tolerant virtual server

Hide thumbs Also See for Express 5800:

Table of Contents

Installing Virtual Server

You install Virtual Server R2 SP1 on the FT Server without installing the management Web application.

1. From the Virtual Server CD-ROM, start the Setup Wizard (also called Microsoft Virtual Server 2005

Setup). If you start the Setup Wizard manually, use Setup.exe.

2. Proceed through the wizard until you reach the Setup Type page.

3. On the Setup Type page, select Custom.

4. Click Virtual Server Web Application and select This feature will not be available. Figure 12 shows

this interface.

5. Accept the defaults in the installation wizard.

6. Click Install to begin the installation.

7. Once the installation is complete, the Setup Complete page appears. Click Finish to close the page

and exit the Setup Wizard.

Install the Virtual Server Web application on a management system to create a management website. To

enable the Web application to manage virtual machines on a remote system, configure Constrained Delegation.

Constrained Delegation enables the Web server to forward client credentials to the host Virtual Server to

enable the client to manage the virtual machines.

Before you configure Constrained Delegation, ensure the domain functional level is Windows Server 2003

native. Complete the following steps to configure constrained delegation:

1. On the domain controller, open Active Directory Users and Computers.

NEC Express5800 Fault Tolerant Virtual Server Quick Start Guide

Figure 12: Deselect the Virtual Server Web Application

Table of Contents