Appendix A - Specifications - Mcu600 - Navman G-PILOT 3380 Installation Manual

Appendix A - Specifications - MCU600

Electrical:
Drive power supply: 10.5 to 16.5 V DC, 20 A
maximum
8-Way Terminal power supply: 10.5 to 16.5 V
DC, 300 mA.
Other optional instruments: refer to the
instrument's operation manual.
Interfaces:
NavBus: connection to other Navman
instruments and G-PILOT 3380 display unit.
NMEA 0183 ports: NMEA 1: Input; NMEA 2: Can
be programmed to be an input or output
NMEA 0183 output messages: HDG, HDT, RSA;
NMEA 0183 input messages: APA, APB, BOD,
BWC, MWD, MWV, RMA, RMB, RMC, VHW, VTG,
XTE
Standards compliance:
EMC compliance
USA (FCC): Part 15 Class B.
Europe (CE): IEC 60945:2002 Clause 9 & 10.
New Zealand and Australia (C Tick): IEC
60945:2002 Clause 9.
Environment:
Compass: IPx6 and IPx7 - completely
waterproof.
Gyro: IPx6 and IPx7 - completely waterproof.
Rudder feedback unit: IPx6 and IPx7
- completely waterproof.
MCU600 Main unit: Not waterproof - requires a
cool, dry, clean environment.
28
MCU600 Main unit Drive
connections:
Terminal Signal
1 Heavy duty power positive, 10.5
to 16.5 V DC
2 Heavy duty power negative
3 Steering drive negative output
4 Steering drive positive output
MCU600 Main unit 8-way Terminal
connections:
Terminal Signal
1 Light duty power positive, 10.5 to
16.5 V DC
2 Light duty power supply common
3 NavBus +
4 NavBus —
5 NMEA common
6 NMEA in 1
7 NMEA in 2
8 Steering clutch relay drive output,
switched ground to turn relay on,
30 V DC, 300 mA maximum
MCU600 Internal Fuse:
2x fuses - both fuses are the same
Type: ATC - Automotive blade
Rating: 20A
NAVMAN
G-PILOT 3380 System Installation Manual