Navman G-PILOT 3380 Installation Manual page 24

Wiring other instruments
MCU600
Clutch relay out: 8
NMEA2 - in/out: 7
NMEA1 - in: 6
NMEA common: 5
NavBus -, Blue: 4
NavBus +, Orange: 3
Ground, Black: 2
12 V power +, Red: 1
Note:
Refer to the instrument's installation manual for more wiring information.
If adding more than three display units or other series instruments, fit a separate light-duty power supply
for the extra instruments (see section 3-4 or the instrument's installation manual)
The external alarm outputs (green wire) of Navman series instruments and 5000 series chartplotters
can be connected together to drive the external beepers and lights.
In systems with several other instruments, we recommend using NavBus junction boxes to simplify
wiring (see the NavBus Installation and Operation Manual).
• Follow the wiring guide (see section 3-2-2).
G-PILOT 3380 System Installation Manual
Addtional G-PILOT
3380 or G-PILOT 3100
display units
Display
units
Green
(from one display unit only)
Other series
instruments
Units
NMEA
in & out
Green
NAVMAN
A GPS, such as a
Navman
TRACKER 5600
GPS
Power,
NMEA in
Clutch, optional
(see section 3-4-2)
NMEA in/out
GPS NMEA out
GPS NMEA common
Light duty power
(see section 3-4-1)
Green
Beepers and lights
(see previous page)
25