Operating The Receiver; Main Menu - Samsung DSR 9500A Instructions For Use Manual

BASIC FUNCTIONS
8. Teletext OSD
When the current broadcasting program provides
Teletext OSD, press the Green ( ) key twice
to see the current Teletext OSD list.
To change the Teletext OSD:
Use the / keys to select a Teletext OSD
you want.
Press the key and then the Teletext OSD
you want is displayed on the screen.
9. Teletext VBI
When the current broadcasting program provides
Teletext VBI, press the Green ( ) key three times
to see the current Teletext VBI list.
To change the Teletext VBI:
Use the / keys to select a Teletext VBI
you want.
Press the key and then the Teletext VBI
you want is displayed on the screen.
GB-14
D I G I T A L S

Main Menu

After installing your antenna system and DSR 9500A with appropriate connectors.
Plug in the AC main power and switch on the receiver.
Press MENU key to bring up the main menu.
The LED display will show "MENU".
The following on screen display will appear:
The sub menu topics will be displayed.
For the sub-menus 1, 2 and 3 you need the PIN code.
You must follow the help message at the bottom
of the screen!
Before you begin with the "Installation"
menu, you should check in the 4th menu
"System Setup" whether all the information
there is applicable for you.
1. Installation
The menu provides settings for customizing, adding new
services and displaying the status of the receiver.
Select "Installation" in the main menu mode to
select the sub menu.
Enter the PIN code.
If you have not entered your own PIN code
then the PIN code 0000 applies, which was
set at the factory.
A T E L L I T E R E C E I

OPERATING THE RECEIVER

GB-15
V E R