Kenmore Elite Side by Side Refrigerator Use & Care Manual page 8

8
Toe GrilleInstallation& Removal
To remove the toe
grille:
1 Open freezer and refrigerator
compartment doors.
2 Working from left side of toe grille,
slip your fingers between top of toe
grille and cabinet. Gently pull forward
until first set of tabs are free. Slide
your hand down past the free tabs
and pull forward again until the
second set of tabs are free. Continue
this process until all tabs are free and
the toe grille can be removed.
To install the toe
grille:
3 Open freezer and refrigerator compartment doors.
4 Line up toe grille at base of refrigerator, making sure the four bottom tabs are resting
through holes at base of cabinet.
5 Starting from left side of toe grille, press in on first top tab using your thumb and push
toe grille forward until it snaps in place. Continue this process until all tabs
aresnapped in place and toe grille is secured to refrigerator.
Leveling
All four corners of your refrigerator must rest firmly on a solid floor. Your
refrigerator is equipped with adjustable front rollers to help level your
unit. To ensure proper door seal and assist door closing, the refrigerator
should be tilted 1/4" (6 mm), front to back.
To level your refrigerator:
1 Remove toe grille
(See "To remove the toe grille").
2 Use flat-blade screwdriver or 3/8-inch socket wrench to adjust front rollers.
3 Check both doors to be sure seals touch cabinet on all four sides.
The Refrigerator d oorsare designedto shutby themselveswith a 20 degreeopening.