Table of Contents
Advertisement
Oven Control Functions
READ THE iNSTRUCTiONS
CAREFULLY
BEFORE
USING THE OVEN. For satisfactory
use of your oven, become familiar with
the various pad functions
of the oven as described
below.
CLOCK SET
COOK TIME
FEATURE
PAD
Used
PAD
Used to
INDICATOR
to set the
enter the length of LIGHTS
These
time of day..,
the baking time.
light to show
_.
which feature is
OVENINTERIOR
_
--_in
use.
LIGHT PAD
Used to
[urn oven ntenor ight
_\
-,.
ON or OFF. This _ad is
"_-
also
used
to acnvate
_
_
o
®
the Cooktou Lockout
"_--_
"
feature some moaelsL
SELECT SELF-CLEAN
®
o
PAD
Used to select
me Self-Cleaning
cycle. A 2. 3 or 4 hour
_-
Self-Clean t_memay De
/
J
selected.
/
/
/
J
TIMER SET/OFF
DELAY START
PAD
Used to set or
PAD
Used to
cancel the minute
set the desired
timer. The minute timer
start time for
does not start or stop
baking & Self-
cooking. Also,
Clean. May be
TIMERSET/OFFpad
used with COOK
is used to set the
TIME to program
Continuous Bake
a delayed bake
feature,
cycle.
UP and DOWN ARROW PADS--
Used along with the function
pads to
select oven temperature,
cook time,
start time (when programming
an
automatic
start time), time of day,
clean time and minute timer.
o
o
o
o
ADD 1 MINUTE --
Use to select Add
1 Minute feature.
BAKE PAD--
Used to select
the bake
function.
BROIL PAD--
Used to
select the variable
broil
function.
_¢2%
WARM & HOLD PAD--
--
,
Used to set the Warm &
Hold feature.
SLOW COOK PAD--
Used to set the Slow Cook
feature.
RECIPE RECALL PAD--
Used to set the Recipe
Recall feature.
OVEN, PREHEAT & DOOR LOCKED LIGHTS* --The
"OVEN"
STOP/CLEAR
PAD--
light will glow each time the oven turns on to maintain the set
Used to clear any
oven temperature.
The "PREHEAT"
light will glow when the
function
previously
oven is first set to operate, or if the desired temperature
is reset
entered except the time
higher than the actual oven temperature.
The "DOOR LOCKED"
of day and minute timer.
light will flash when the oven door locks and unlocks or when
Press STOP/CLEAR
to
using the Self-Clean
cycle or the oven door lockout is activated,
stop cooking. Also the
The indicator
light will glow constantly
after the door
STOP/CLEAR
pad is
Iocks.COOKTOP
LOCKED
light will glow when the cooktop has
used to activate
oven
been locked (some models),
door lockout setting.
*Note: The OVEN indi¢ater light on the electronic
display will
V
once to change back to normal sound mode (:SP will
turn ON and OFF when using the Bake feature and during
preheat. This is normal and indicates that the oven is cycling
appear in the display). The control will now provide normal
to maintain the selected baking tempe[ature.
Whe n the
audible beeps whenever
a pad is pressed.
preheat indicator light turns OFF, your oven is ready.
Temperature
conversion
For a silent
control panel
When choosing a function, a beep will sound each time a pad
is pressed. If desired, the control can be programmed
for silent
operation.
To switch back and forth between normal sound or
silent operation:
Press & hold _.
After 7 seconds, the control will beep once.
:SP should appear in the display indicating that the control is in
The electronic oven control is set to operate in °F (Fahrenheit)
when shipped from the factory. The oven can be programmed
for any temperature
from 170°F to 550°F (77°C to 287°C).
To change the temperature
to °C (Celsius)
or from °C to °F
(control should
not be in a Bake or Clean mode):
1. Press
B,o_ ....
appears in the display.
normal sound mode. Press either _'_- or V
once to change
2.
Press and hold the A
until "HI" appears in the display.
to silent mode (:- - will appear in the display). The silent mode
will block the controls from sounding when a pad is pressed.
3.
To return to normal sound operation,
press & hold _.
After 7
4.
5.
seconds :- - will appear in the display. Press either
A
or
Press and hold B,o_until °F or °C appears in the display.
Press the J%
or V
to change °F to°Cor°Cto°F.
Press any control pad to return to normal operating mode.
Setting Oven Controls
Note: The time of day must
first be set in order to operate
the oven.
To Set the Clock
When the range is first plugged in, or when the power supply to
the range has been interrupted,
the display will flash "12:00".
(/Q') once (do not hold pad down).
1.
Press
2,
Within 5 seconds, press and hold the _
or V
until the
correct time of day appears in the display.
Note: The clock cannot be changed during any timed bake
or Self-Clean cycle.
10
Advertisement
Table of Contents
