How To Set Attenuation - Agilent Technologies Agilent 8163A Manual

Laser Sources
112

How to Set Attenuation

P = P
output source
P is the power level at the output of the module,
output
P is the power level at the output of the source, and
source
ATT is the attenuation parameter.
1
Figure 60 The Power Sensor Details Screen
2
3
Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Sixth Edition
How to Use Laser Source Modules
ATT (dB)