Displaying Ais Target Data - Furuno FR-8062 Operator's Manual

4.5

Displaying AIS Target Data

The data box at the bottom of the screen can show the data (MMSI No., ship name, bearing,
course, range, CPA and TCPA) for up to two AIS targets. (Set Data Box in the Display menu to
Target or All to show AIS target data.)
To show AIS target data, place the cursor on the activated target that you want to know its data
and press the ENTER key.
Bearing, range, CPA
Course, speed, TCPA
The AIS target chosen is marked with MMSI no. and the alphabet A or B, which corresponds to
the data box in which the target's data appears. The box is automatically chosen on a first-in, last-
out basis. For example, if both data box A and data box B are currently showing data and target
A was selected before target B, the data in data box A will be erased and replaced with the data
of the newly selected AIS target.
To remove a target's data from a data box, place the cursor on its target symbol and press the
CANCEL/HL OFF key.
0.5
3
NM
+ 110.1°R 2.525 NM
B
A
Data box A
Data box (A or B)
Vector reference
Vector time
TRUE 5 min
A
NAME: PEGASUS
LENGTH: 100M BEAM: 45M
°
BRG 236.5 T RNG 1.850NM
°
CSE 33.7 SPD 12.34kt
AIS data
+
AIS target selected for
(A)
data display
000000026
(A or B: Data box location
9-digit no.: MMSI)
+
Cursor
Data box B
MMSI of vessel
Name of
vessel
MMSI:
000000026
CPA 1.84NM
TCPA 12:00
4. AIS OPERATION
Length, Beam
of vessel
4-3