Fujitsu PRIMERGY T850 System Configurator And Order-Information Manual page 6

Table of Contents

Advertisement

A
Rack Basic Unit (4U), 8-way
including 2x Xeon MP processor
2 system boards
upgradable to 8 CPUs
S26361-K846-V815
1,5 GHz / 1MB
S26361-K846-V819
1,9 GHz / 1MB
S26361-K846-V820
2,0 GHz / 2MB
16-way Upgrade
S26361-F2738-E316
PRIMECENTER Rack
SNP:SY-F1647E301-P
Installation ex works for one
server or subsystem.
Hereby the rack will be delivered
completely pre-mounted and
all wired connections are tested.
With racks 12U, 24U, 38U:
Systems and components
will be delivered installed in the rack
With racks 46U:
Systems and components
will be delivered separately
To be ordered only together with
a PRIMERGY-
PRIMECENTER rack
e.g.:
S26361-K826-V10x
refer configurator PC-Rack
max. 1x per System
B
Requires two Rack Basic Units
fully equipped with 8 prcessors each.
Only available after Special Release
is granted.
For Windows 2000 Datacenter or
VMware 1.5 only.
The 16-way configuration is only
available on request of an
Special Release.
"Rack-mounting ex factory"
This service is to be ordered once
per installable server/storage
subsystem, in order to get the
server/storage subsystem
mounted into the PRIMERGY racks.
In case of the 46 U PRIMERGY Rack,
this service has to be ordered,
to get the mounting kits and the
cables installed.
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server
System configurator and order-information guide
PRIMERGY T850
Rack Basic Unit (4U), 4-way
including 2x Xeon MP processor
1 system board
upgradable to 4 CPUs
S26361-K846-V415
1,5 GHz / 1MB
S26361-K846-V419
1,9 GHz / 1MB
S26361-K846-V420
2,0 GHz / 2MB
S26361-F2738-L308
Ugrade System Board
without processor
enables upgrade to 8 CPUs
max. 1x per system
If two system boards are installed, both have
to be equipped with processors and memory
Status 2003-09-23
6 of 18

Advertisement

Table of Contents
loading

Table of Contents