Table of Contents
Advertisement
Start PRIMERGY T850
I
Section
System unit consisting of:
* 4U rack mountable housing incl. 2 hot plug power supply modules redundant
* 4 hot replace fans
* Drives / Bays
Systemboard, to upgrade to 4 or up to 8 processors with:
External Interfaces:
Cables:
Software:
Mounting kit for PRIMERGY T850 is part of the basic unit
Mounting kit for mounting of servers in in FSC 19" PRIMECENTER- racks
and all server racks conforming to EIA standard EIA-310-D for 19" racks.
Therefore the mounting kit is variable in deepth from 710-815mm
A
Basic unit
- temperature sensor for CPU module and FSC PDA function
- 1 drive bay 3.5"/0.5" high (occupied by 1 floppy disk
- 1 drive bay 5.25"/0.5" high (occupied by 1 DVD-ROM)
- 2 bays for 1" hard disks
- 6 slots PCI-X 64 Bit (2x 133 MHz, 2x 100 MHz, 2x 64 MHz, (1x occupied by 1 RemoteView serviceboard)
- 2x Xeon processors, 100 MHz quad-pumped FSB
- 2-channel U160 SCSI controller on-board
- graphics processor on board 8 MB (PCI)
- LAN Controller 10/100/1000 on-board
- Fast-IDE controller (for DVD-ROM)
- RemoteView Serviceboard in a PCI slot
- 1x RS-232-C (serial, 9 pin)
- 1x keyboard (PS/2)
- 1x mouse (PS/2)
- 1x VGA (15 pin)
- 3x USB UHCI (1x front side)
- 1x LAN RJ45
- 3x SMP Interconnect
- 1x PCI extension
- 1x SCSI U160 (UHD68)
1. IDE cable for CD/DVD
2. U160 SCSI cable for connection of the HD backplane
3. Power cord
- ServerStart packet incl. ServerBooks CD, ServerSupport CD and ServerView
- 1 pair of telescopic rails (710-815mm)
- 1 pair of carrier rails
- 1 bracket PC-Rack
- 1 cable management PC-racks
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server
System configurator and order-information guide
PRIMERGY T850
Status 2003-09-23
5 of 18
Advertisement
Table of Contents
